[TR] TR6 electrical stuff stops

[John Young]

You said you sanded the fuses. Did you also clean the fuse holder? That is probably where most of the corrosion is. Try the little brass bore brush from a .22 rifle cleaning kit for them.


John Young NASS# 528
Indiana
'78 Spitfire
'66 Spitfire
'59 TR3A (getting body work)
'59 TR10 ruuning, but not ready for the highway.

From: David Soknacki <soknacki at soknacki.com>
To: triumphs at autox.team.net
Sent: Tuesday, August 9, 2011 1:36 PM
Subject: [TR] TR6 electrical stuff stops

Thanks so much for the suggestion to again re-check all the fuses. The idea
worked, sort of!

I took out and sanded all of the fuses, then tried the wipers. They worked,
as did the guages and blower. I drove the car and then parked it. But when I
started it up again, I had the original issue.