[TR] TR4A - Scuttle Lid

[Foster, Stan (HP IT)]

Guy, if that seal is anything like the one supplied for the TR6 it has to be
seriously trimmed to allow the lid to fully close. I went through a few of
them before I got one trimmed the right amount to let the lid close but keep
water out.

Stan

-----Original Message-----
From: triumphs-bounces at autox.team.net [mailto:triumphs-bounces at autox.team.net]
On Behalf Of Guy D. Huggins
Sent: Wednesday, September 15, 2010 12:22 AM
To: triumphs at autox.team.net; RedRiverTriumph at yahoogroups.com
Subject: [TR] TR4A - Scuttle Lid

Listers,

What's the secret to getting the scuttle lid to lay flat over the seal?
It appears as if the seal is too thick.



Cheers,

Guy D. Huggins
1965 Triumph TR4A
CTC 63569LO

Online project diary at http://www.genfiniti.com/triumph