[TR] Floppy sun visor

[Bob Danielson]

Very simple solution that has held my visors in place for 12 years now. This 
is easiest to do with the visors off of the car. Pull the visor off of the 
rod and bend the rod every so slightly.........just an itsy bitsy teeny bend 
will hold them in place. Some guys try crimping the metal channel in the 
visor but the rod bend is easier and works great.

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: "Dr. Bruce Cairns" <Cairnsbk at sbcglobal.net>
Sent: Friday, October 15, 2010 2:17 PM
To: "Triumph Sports car discussion" <triumphs at autox.team.net>
Subject: [TR] Floppy sun visor

> Whilst motoring about with the top down, the passenger-side sun visor on 
> my
> '74 TR6 steadfastly refuses to remain in the flipped-up orientation.  I 
> have
> replaced the visor and rubber retaining chock, wrapped the end of the 
> visor
> rod with gaffer's tape, attached velcro to the visor and the corresponding
> surface of the windscreen frame - all to no avail.  I start out my drive 
> with
> both visors up and after about 30 seconds, the right side visor is 
> flopping
> down.  I need some sort of visor Viagra - any suggestions?
> Many thanks,
> Bruce Cairns
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/75tr6@tr6.danielsonfamily.org