[TR] TR3 Fog/Spot Lamp wiring schematic - revised

[cfmtr3a at verizon.net]

Thanks to Randall and others I have uploaded a revised diagram for the fog/spot lights at http://s1001.photobucket.com/albums/af136/cfmtr3a/?action=view¤t=fog-spotschematicv2.jpg.

The lamp relays are mounted on the front side of the horn tower on the passenger side. Wiring will be bundled with the 'leg' that feeds the horns, etc on that side of the engine compartment. Each relay has two power lines going to the front - one to each side. This is so that if I decide to run two fog or two driving lights, I can make the switch without major effort. The connectors will be right behind the front edge of the radiator shroud. 

I expanded it to include a second 4FJ fuse box (same as original) which feeds the lamps as well as two accessory lines for a Butler Flexible map light & power plug (Stanpart cigar lighter). The box will be mounted next to the original box and get its feed from the A & A1 tabs of the Voltage Regulator. This changes the routing of those two wires so that they do not have to be part of the 'spaghetti' behind the dash but will retain their original source. The switches and power plug will be mounted on the passenger side dash support next to and on either side of the ashtray. 

I have ordered the wire - so once it is all connected I'll post a couple more images on photobucket.  Also on PB is an image of the switch panel and a materials list (I think I listed everything).

Thanks to all for their advice, concerns, questions, and help on this. Hopefully, the diagram and list will be helpful to others who might be contemplating this task/upgrade. 

Carl
TS81802LO