[TR] TR3 Fog/Spot Lamp wiring

[Geo Hahn]

On 11/24/10, cfmtr3a at verizon.net <cfmtr3a at verizon.net> wrote:

> ...the wiring was "tied" beneath the bumper
> supports - routed behind the bumper & overrider to the lamps.  Very sloppy
> look...

Like the wires for the license plate lamps on the TR4?

Will probably look neater if run thru a plastic sheath.  On the TR4
rear they attached the license plate lamp wires to the black steel
bumper brackets using metal clips -- a route and method that might be
a bit more discreet for the driving lamps.

I suppose those holes in the supports were for drainage.  Even if
enlarged I would be concerned about wire chafing if run thru them.

Geo