[TR] TR3 Top Erecting

tfansher at comcast.net tfansher at comcast.net
Tue Nov 9 15:14:17 MST 2010


That's what I do, but leaving both sides open just behind the door, 3 or 4
snaps, then erect the bows and snap both sides down.

Tom



----- Original Message -----
From: "William Brewer" <wsb1960tr3a at att.net>
To: "Triumphs" <triumphs at autox.team.net>
Sent: Tuesday, November 9, 2010 4:42:15 PM
Subject: [TR] TR3 Top Erecting

B B  B  Just curious what techniques work for getting the top bows up on a TR3
top after the snaps have been snapped. Every fall I find the top has shrunk a
little more which makes for a bunch of head scratching. My best technique for
the last couple of years has been to leave the driver's side bottom
lift-a-dots unsnapped (the first 3 or 4 behind the door). Then I pull up the
top bows easily on the passenger side. Standing outside the driver's door of
the old TR3 I can grab the lower part of the top bows and pop the driver's
side top bows into place without too much trouble.
B B  B  My technique works for me 100% of the time, even in the cold.
B B  B  What are the other methods sidescreen listers are using?
B B  B  Just wondering.

B B  B  Bill in Tehachapi


More information about the Triumphs mailing list