[TR] Undercoating

[Carl TR]

Along these same lines - has anyone used truck bed liner material as an 
interior undercoating to cut down on the noise/vibration/heat?

examples (brush on):
http://www.herculiner.com/product_info.html
http://www.nonslipcoating.com/automotive.htm

As  I was looking at web pages - several listed them as 'undercoating' 
alternatives and a couple even did color matching.

Carl
--------------------------------------------------------------------------------
Carl - Tampa
1961 TR3A TS81802LO
Body Off Restoration
Completion Date: NATC 2010 (Jekyll Island, GA)
http://mysite.verizon.net/cfmtr3a/
(Photos updated 5/18/10)


----- Original Message ----- 
From: "Guy D. Huggins" <guy at genfiniti.com>
To: <triumphs at autox.team.net>; <RedRiverTriumph at yahoogroups.com>
Sent: Saturday, May 29, 2010 6:40 PM
Subject: [TR] Undercoating


> All,
>
> Does anyone have any experience with undercoating materials that could 
> offer
> some recommendations and/or things to avoid.
> I am looking at the DIY kits and am leaning toward Al's Liner.
> I will be applying this to the underside of the body tub, as well as to 
> the
> wheel wells.
>
> Thanks in advance!
>
> Cheers,
>
> Guy D. Huggins
> 1965 Triumph TR4A
> CTC 63569LO
>
> Online project diary at http://www.genfiniti.com/triumph
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net