[TR] TR4A rear engine lift point

[Tony Drews]

Yes.

- Tony

At 07:40 PM 5/30/2010, Frank Fisher wrote:
>Geo
>it looks like the bottom slot fits onto the exhaust manifold bolt? y/n?
>Frank
>
>
>________________________________
>From: Geo Hahn <ahwahneetr at gmail.com>
>To: Triumphs <Triumphs at autox.team.net>
>Sent: Sun, May 30, 2010 2:53:42 PM
>Subject: Re: [TR] TR4A rear engine lift point
>
>Here's mine:
>http://members.cybertrails.com/~ahwahnee/LiftEyeRear.JPG
>
>As I recall, I
>fitted it over the head stud, then had to use a hammer
>(lightly) to tap the
>bottom bit home.
>
>Geo
>
>_______________________________________________
>Triumphs at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested
>annual donation  $11.47
>Archive: http://www.team.net/archive
>Forums:
>http://www.team.net/forums
>Unsubscribe:
>http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
>
>_______________________________________________
>Triumphs at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $11.47
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com