[TR] tools to correctly install a TR3A harness

Bob Danielson 75tr6 at tr6.danielsonfamily.org
Thu May 20 12:03:53 MDT 2010


While I went with the AAW harness for my TR6, some of the tools/tips ;listed 
here (http://tr6.danielsonfamily.org/Wire_Harness_1.htm) might help. You 
should also go to British Wiring (http://www.britishwiring.com) and check 
out their supplies and tools like the
 bullet crimper #TT85  and their bullet pliers #SSC1. 
(http://www.britishwiring.com/CAT28_29.PDF)  Neither tool is cheap but they 
do make working with bullets a whole lot easier.

Bob

Bob Danielson
1975 TR6 running with
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs
http://tr6.danielsonfamily.org
--------------------------------------------------
From: "davewillner" <dwillner at ptd.net>
Sent: Thursday, May 20, 2010 8:53 AM
To: <triumphs at autox.team.net>
Subject: [TR] tools to correctly install a TR3A harness

> What tools are recommended to do an "original" looking wireing harness
> replacement job easily, getting a new cloth covered wiring harness and 
> want to
> make sure it is done correctly and looks pretty original...done bikes, but
> never have done a car before...Thanks
>
> Dave Willner
> Stroudsburg, PA
> 59 TR3A
> 70 MGB
> 70 BSA Victor Special
>
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/75tr6@tr6.danielsonfamily.org


More information about the Triumphs mailing list