[TR] TR4 door pulls for your TR6

[Dave1massey at cs.com]

In a message dated 3/17/2010 6:21:37 PM Central Daylight Time, 
tr3driver at ca.rr.com writes: 
> Horrible Freight sells a kit with a variety of the nuts, and an 
> installation
> tool.  Frequently on sale for $10, but apparently full price is $17:
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=1210
> 
> The tool is not absolutely necessary, you can set them with just a screw 
> and
> nut of the appropriate threads.
> 

If you can keep them from spinning.  Lubricate the threads well.

But at $17 get the tool.  That's cheap considering that the RivNut(R) tool 
is over $100.  This tool won't last as long but if you're only setting a 
dozen or so it should be good enough.

Dave