[TR] PDWA

[Dave1massey at cs.com]

In a message dated 6/15/2010 11:20:50 AM Central Daylight Time, 
brad.kahler at 141.com writes: 
> I'm assuming a standard brake line union as found in the auto parts 
> stores
> would be sufficient, or are the flares on the Triumph brake lines unique?
> 

The British brake line fittings are different from the domestic ones.  One 
has threads that run all the way down the nut and the other has an 
unthreaded portion.  But I forget which is which.  Obviously, the fully threaded nuts 
will not work properly in the fittings that are not fully threaded but the 
opposite should work OK.

So check the fittings before you take off.

Dave