[TR] Hi RPM's

[Chip19474 at aol.com]

Also.......squirt some choke cleaner or WD40 on the throttle shafts right  
where they go through the carbs while the motor is running - listen for any  
change in rpm - if the shafts are sealing correctly, the rpm should stay  
consistent.
 
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6  CF57822U
 
 
In a message dated 6/5/2010 5:23:18 P.M. Eastern Daylight Time,  
Dave1massey at cs.com writes:

Grab the  shafts and see if they will 
wiggle.  If there is too much play the  throttle plates don't return to the 
same 
position and will bind up  off-center creating a larger opening causing a 
high  
idle.