[TR] TR4 Caliper Rebuild & Heater Pipe Questions

[Randall]

> Should I
> remove the bolts and split the caliper halves?

Many people do, although Girling said specifically not to.  Note that there
is a sealing ring between the halves that should be replaced if you do split
them.  It's available separately, not included in the seal kit.

> How
> do I attach this to the pump housing with the nut when it doesn't have a
> flared end?

The original setup had an iron adapter fitting between the housing and tube,
with pipe threads into the housing and a compression sleeve to grab the
tube.  You need that fitting or an equivalent.

Randall