[TR] [6pack] Wing or Side Fender Vents

[Mark Hooper]

That's a nice look. Question - How does one get street papers for a car with
the original bumper removed? In most places I have heard of that would be a
no-no. The picture makes it seem that the car was driven to the location it
was at.

Mark
1972 TR6

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Foster, Stan (HP IT)
Sent: January 19, 2010 11:40 PM
To: Jim Jones; fot at autox.team.net; triumphs at autox.team.net;
6pack at autox.team.net; tony at tonydrews.com; N197TR4 at cs.com; gsfuqua1 at aol.com
Subject: Re: [6pack] Wing or Side Fender Vents

Here is a TR4 with those vents installed. I liked this TR so much I may have
drooled on it.

http://i38.photobucket.com/albums/e119/foster461/NET%20VTR%202007/TR4.jpg

Stan

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Jim Jones
Sent: Tuesday, January 19, 2010 9:51 AM
To: fot at autox.team.net; triumphs at autox.team.net; 6pack at autox.team.net;
tony at tonydrews.com; N197TR4 at cs.com; gsfuqua1 at aol.com
Subject: Re: [6pack] Wing or Side Fender Vents

Do you have a link to a picture of these vents?

JJ

--- On Tue, 1/19/10, gsfuqua1 at aol.com <gsfuqua1 at aol.com> wrote:


From: gsfuqua1 at aol.com <gsfuqua1 at aol.com>
Subject: [6pack] Wing or Side Fender Vents
To: fot at autox.team.net, triumphs at autox.team.net, 6pack at autox.team.net,
tony at tonydrews.com, N197TR4 at cs.com
Date: Tuesday, January 19, 2010, 2:46 AM


I am looking for a set of the chrome grill vents that many of the Rally TR
4's used.  As I recall they were slightly squarish in size and had a large
checker board grill affect.  The idea being to let some of the engine bay
heat be carried out through the side wings or fenders.  The fit flush with
the side of the fender or wing and extend inward into the engine bay.

Any help would be greatly appreciated.

Cheers, Gary