[TR] trunk luggage rack TR3
npaul72464 at aol.com
npaul72464 at aol.com
Sat Dec 11 13:36:09 MST 2010
I didn't use the hardware that came with the rack so I didn't need to remove hinge. Also, I can easily take the rack off as needed. I used a stainless bolt the diameter of the hinge pin and used a bushing to fit the hole in the rack piece. I could send pics or offer more info if desired.
Ned Paulsen
1958 TR3A
-----Original Message-----
From: Frank Fisher <yellowtr3 at yahoo.com>
To: triumphs <triumphs at autox.team.net>
Sent: Sat, Dec 11, 2010 12:25 pm
Subject: [TR] trunk luggage rack TR3
i have just bought a trunk luggage rack for my TR3. its a replica of the
original type that fastens through the hinge.
I'm a little reluctant to take off the hinges as the modern replacements (mine
are) just strip threads even by looking at them.
has any one done this installation?
how tough was it to get the hinge pins out?
is the bolt for the rack the same diameter as the hinge pin or do i need to
drill out the hinge?
any words of wisdom?
thanks
Frank
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: http://autox.team.net/mailman/options/triumphs/npaul72464@aol.com
More information about the Triumphs
mailing list