[TR] Fwd: TR3 O/D Wiring question

[Geo Hahn]

On 12/4/10, Randall <TR3driver at ca.rr.com> wrote:
>
> ...I added a in-line fuse between the ammeter and C1, and also a diode
> from C2 to ground...

Inspired by Randall's example I did this too.

The fuse can be added w/o cutting into the harness --

http://members.cybertrails.com/~ahwahnee/SF_Fig_1.jpg
http://members.cybertrails.com/~ahwahnee/SF_Fig_2.jpg
http://members.cybertrails.com/~ahwahnee/SF_Fig_3.jpg

I also added the mentioned diode.  No photo handy but this shows how
it goes (red is the added diode, the rest of the diagram may be at
variance with yours as it is for a TR4):

http://members.cybertrails.com/~ahwahnee/OD%20Diode.JPG

Geo