[TR] TR] 2-speed wiper wiring diagram

spamiam at comcast.net spamiam at comcast.net
Mon Sep 28 13:11:44 MDT 2009


Carl,B 



I helped Dan write his section on the 2-speed wipers in his electrical
manual.B  I had a TR4A 2-speed motor out on my desk at the time.B  I did not
dismantle it.B  I found that the "low" speed was obtained by grounding BOTH of
the switched wires.B  It made no sense to me.B  A few hypotheses were made
about why this may be true, but that seems to be the way it works.B  I have
been tempted over the tears to pursue this further, but I never bothered.B  To
me they are literally a black box, but I woud be interested to see how they
really work!B  Keep me in the loop too!



-Tony


----- Original Message -----
Message: 5
Date: Mon, 28 Sep 2009 09:43:18 -0700
From: carlsereda < carlsereda at aol.com >
Subject: [TR] 2-speed wiper wiring diagram
To: fogbro1 at comcast.net , triumphs at autox.team.net
Message-ID: < 96887ACA.33C2.4FD8.A80E.7B0656B0D319 at aol.com >
Content-Type: text/plain; charset="us-ascii"

Hi Ed,
If you have any luck finding specs can you keep me in the loop?
I believe the way 2-speed wiper motor works is when you turn on the second
click of the 2 -position switch, a secondary winding on the field coil (simply
about 50 rounds of extra wiring over the standard field coil) is activated,
giving faster armature action. Otherwise I think all else is same as a
standard 1-speed unit.
Regards,
Carl
'63 TR4 since '74


More information about the Triumphs mailing list