[TR] Valve cover gasket TR3

[FRED E THOMAS]

Ken Gilanders @ British Frame & Engine sells a very special unit produced in 
the U/K, mine is almost 7 years old right now and no leaks ever  FT
===============================================================================================================
----- Original Message ----- 
From: <wbeech at flash.net>
To: <triumphs at autox.team.net>
Sent: Saturday, November 21, 2009 11:23 AM
Subject: [TR] Valve cover gasket TR3


> Good morning List,
>
> I am wondering if there is anything better than the cork gasket for the
> stock chrome valve cover for my TR3A.  What are you using, stock from TRF,
> Moss, BPNW or some new space age material?
>
> Thanks,
>
> Bill Beecher
> '58 TR-3A TS/30766 L (On the road in 2009!)
> "A Triumph is man's best friend, it always comes when it is called...of
> course, some times it is difficult to make it go"
>
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive