[TR] Valve cover gasket TR3

[Geo Hahn]

On 11/21/09, wbeech at flash.net <wbeech at flash.net> wrote:
> Geo,
> Do you use any sealer on either side?
> Bill

I've used Hylomar in the past but as I recall from when I recently had
the valve cover off the remains of the Hylomar were still tacky enough
that I simply put the gasket back on w/o using any additional sealant.

I suspect that a well-broken-in (but undamaged) cork gasket may
actually seal better than a new cork one which presents a flat surface
to the cover and may further compress over time.

Geo