[TR] Fwd: Measurements - TR3

[Carl TR]

Thanks to Rod & Daniel for providing the needed information.

Update on the TR3A project:
The car will be completely in primer by Monday and it is going to the 
painter on Wednesday.  I was picking up some boxes on the way home from work 
in which to pack the parts for the 50 mile trek to the painter.  I didn't 
want to mess up the FLAWLESS primer/prep work.

I should have it back around the 5th - although I have until the 17th when I 
am taking an extended holiday break to start the next step - re-assembly.

I can really say that the completion of a 8 year journey is in site.... 
Next weekend I put the finishing touches on the engine rebuild and mate the 
engine/clutch/transmission in anticipation of dropping it into the chassis 
(the tub is going to the painter off the chassis).   I'll also finish the 
brake lines, exhaust, and anything else possible before the tub goes back on 
the chassis (for the 4th and final time).

Later,
Carl
--------------------------------------------------------------------------------
Carl - Tampa
1961 TR3A TS81802LO
Body Off Restoration
Completion Date: NATC 2010
http://mysite.verizon.net/cfmtr3a/
(updated 9/29/09)




----- Original Message ----- 
From: <cfmtr3a at verizon.net>
To: <triumphs at autox.team.net>
Sent: Friday, November 20, 2009 12:45 PM
Subject: [TR] Fwd: Measurements - TR3


> My apologies - the Rich formatting was automatic and didn't realize it.
>
> Thanks Randall.....
>
>
>
> Nov 20, 2009 02:56:38 PM, cfmtr3a at verizon.net wrote:
>
> Anyone have access to measure the hood and trunk lids for a TR3?  (outside 
> dimensions at widest points).  Also the 'height'.
>
> I am at work and need the info this afternoon.
>
> Thanks
> Carl
>
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive