[TR] Fwd: Measurements - TR3

[A Daniel Cronin]

11/19/09
Carl
 
Here are measurements from TS6927L:
 
Hood: Front @ latch=46-1/8"
         Rear @ Cowl=47-1/4
         Front height @ Center line* = 3"
         Rear height @ Center Line* = 8-1/2"
 
Trunk: Front @ key=44-1/8"
          Rear @ filler=47-1/8
         Front height @ (key) Center line* = 3-1/8
         Rear height @ (filler) Center line* = 4"
 
* denotes panel sitting on a level floor and measurements taken on a front to
back lateral line
 
Hope this is what you were looking for.
 
Regards,
Dan Cronin

--- On Fri, 11/20/09, cfmtr3a at verizon.net <cfmtr3a at verizon.net> wrote:


From: cfmtr3a at verizon.net <cfmtr3a at verizon.net>
Subject: [TR] Fwd: Measurements - TR3
To: triumphs at autox.team.net
Date: Friday, November 20, 2009, 12:45 PM


My apologies - the Rich formatting was automatic and didn't realize it.

Thanks Randall.....



Nov 20, 2009 02:56:38 PM, cfmtr3a at verizon.net wrote:

Anyone have access to measure the hood and trunk lids for a TR3?  (outside
dimensions at widest points).  Also the 'height'.

I am at work and need the info this afternoon.

Thanks
Carl
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive