[TR] Bleeding Problems

[Randall]

> The furthest rear 
> cylinder(Right Rear) I can get fluid to come out just fine, 
> but not on the other three.

This sounds serious; like there is a line blocked.  Both rear brakes are
supposed to be fed by the same lines, so if one has pressure, the other
should have pressure as well.

The front brakes not working might just mean you need to bleed the MC; try
loosening the fitting to the front brakes (which as I recall is towards the
rear of the MC) and see if you can bleed some air out at that point.

Randall