[TR] Racetorations Aluminum Sump windage tray Installation

[Carl TR]

on a related subjected - any idea where to get a tray?  have the sump 
but....
or, how important is it for 'normal' driving.

Carl


----- Original Message ----- 
From: "Dave Connitt" <dconnitt at fuse.net>
To: "Triumphs" <triumphs at autox.team.net>
Sent: Saturday, May 23, 2009 10:13 AM
Subject: [TR] Racetorations Aluminum Sump windage tray Installation


> To all,
> I recently bought a Racetorations Aluminum Sump and windage tray from a
> local guy  who never installed the thing. It came with a separate pressed
> aluminum windage tray that took a bit of adjusting to fit into the sump
> correctly.
> My question to anyone who has installed one of these is to ask if there is
> any trick to getting the windage tray to stay in it's groove in the sump
> while installing it? The engine is upside down on an engine stand. I think 
> I
> may have to rotate the engine but I just thought I would check with you 
> guys
> first.
> Thanks,
> Dave Connitt
> '67 TR4A
> http://home.fuse.net/davestr4a
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as cfmtr3a at verizon.net
>
> http://www.team.net/archive