[TR] TR3B rear motor mount

[Geo Hahn]

On Fri, May 8, 2009 at 7:39 AM, Irv Korey <emanteno at gmail.com> wrote:

> The earlier, non-syncro 1st gear boxes, are about 3/4" shorter than the
> TR3B-TR6 boxes. That is what is behind Ed's question.


Aaahh.  I was thinking the change occurred in the TR6 run but perhaps I was
just recalling the problem you have to accomodate when fitting a J-Tyoe OD
to a car that would have used an A-Type.