[TR] electric fuel valve recommendation

[Mark Hooper]

Hi Randall:

That would work, but with 3/8" ID pipes I figure the whole thing is 5" long.
Sort of huge for the simple application I had in mind. Not to mention all the
adaptors to go from my standard 1/8" TR6 piping would make it even larger.

However, I'll bet I could find a 1/8" version out there.

Cheers,

Mark


________________________________

From: triumphs-bounces at autox.team.net on behalf of Randall
Sent: Sun 21/06/2009 1:52 AM
To: triumphs at autox.team.net
Subject: Re: [TR] electric fuel valve recommendation



> Can anybody point me to a link for a good electric solenoid valve for fuel
> shutoff?

How about this one?
http://store.partsfortrucks.net/futasevanoam.html

Just cap off the "normally open" port.

Randall