[TR] Newbie

[Randall]

> Air pressure will push the
> piston out only until the reservoir port is uncovered, then pressure is
> lost
> and the piston stops.  Is it supposed to be shaken out somehow?

Sometimes, rapping the cylinder on the (wooden) bench will coax it out.
Another trick that sometimes works is to spray some lubricant (penetrating
oil or whatever) into the area, then use a rod to press the piston all the
way in and let it spring out.

I've also on occasion resorted to using a hone to clean and slightly open
the bore at the end, around the circlip groove.

Randall