[TR] Rear Deck Speaker Plans

[Tom Note]

Sorry to bomb the list, but I could not receive Stan's photos, or any others 
for that matter.
Instead, I always get a message that  "demime 1.01 has removed an 
attachment/image....etc., etc..."
Would someone be kind enough to clue this computer dummy as to how to 
correct this situation.

Thanks much.
Tom

----- Original Message ----- 
From: <stantr6 at comcast.net>
To: "Bob Danielson" <75TR6 at tr6.danielsonfamily.org>
Cc: <Triumphs at autox.team.net>
Sent: Tuesday, January 20, 2009 7:50 PM
Subject: Re: [TR] Rear Deck Speaker Plans


> Attached photos show how I installed speakers on rear deck of my TR6.
> The triangular piece is made from 1/4" plywood I had, the side against the 
> back panel is slightly curved.
> Covered them with padded vinyl from fabric shop, installed t-nuts from 
> rear for mounting speaker. Fabricated z-clips for bottom of speaker mount, 
> as well as the fittings in the corner and above speaker that the spring is 
> attached to. Installed angle alu. as shown, notched to accommodate the 
> speaker. Speaker mount clips over the angle alu., with the spring holding 
> the entire assembly in place.
> Stan