[TR] TR3A Fan extention housing and bolt removal
Art McEwen
amcewen2 at cogeco.ca
Tue Dec 1 17:18:54 MST 2009
Impact wrench and 120psi compressor wouldn't cut it but a pipe wrench on
the extension and jambed against the frame and a 3' length of steel pipe
on the socket gave me enough leverage.
Thanks folks...
Bob wrote:
>
> Cant remember the socket size but I used a 6 point impact socket with impact
> wrench and it just spins right off. You may be able to get it with a breaker
> bar but someone will have to apply the breaks. But that might not work if the
> bolt is tight enough and they usually are!
>
> Just make sure you use short bursts of the impact and use a 6 point socket.
>
> Bob
More information about the Triumphs
mailing list