[TR] Tool Storage
Carl TR
cfmtr3a at verizon.net
Thu Aug 27 20:10:55 MDT 2009
Congrats on the garage... mine has made me a much happy camper working on
the project.
I used a standard furniture mover (18x24 or thereabouts) as a base and built
a rolling pegboard. Could make one just as easily from plywood with rolling
wheels (get the ones that have bearings so they'll roll any directions).
1x4's around the base to make a 'catch-all' then built a frame out of 2x2's
about 40" tall. Attached an old removable tool box shelf to the top as
another catch all - also has a handle that I can use to move it. Then put
pegboard on either side of the 2x2 for hanging the tools. When not in use
it rolls real easily into a nook I have next to the tool bench. I don't
have pictures but can get them if wanted. Oh, I also put 2x2 bracing on
either end/both sides from the frame down to the dolly base for stability.
Works like a charm.
Carl
----- Original Message -----
From: <terryrs at comcast.net>
To: <triumphs at autox.team.net>
Sent: Thursday, August 27, 2009 7:50 AM
Subject: [TR] Tool Storage
>
> So...does anybody have experience with a rolling tool chest they like and
> a
> reasonably priced source for it?B
>
> Terry Smith, '59 TR3A
>
> New Hampshire
More information about the Triumphs
mailing list