[TR] Not good with electrical
Jeff Scarbrough
fishplate at charter.net
Tue Aug 25 17:13:55 MDT 2009
At 06:49 PM 8/25/2009, you wrote:
>If I select volts and attach the two leads to where the bulb plugs
>in, it should show something if it is getting power, and nothing if
>it is not getting power, correct? I don't want to fry anything.
Power goes from fuse > purple wire > lamp > purple/white wire >
switch according to <http://www.advanceautowire.com/tr2506.pdf>
So, check the fuse, then check between the purple wire and ground
(bare metal) at the lamp holder. If that shows voltage (12V) check
the purple/white to ground. If you have voltage there, most likely
the problem is in the switch, which I recall is by the boot hinge.
Cheers,
Jeff
Jeff Scarbrough 75 TR6 x 1, 76 1500 x 2, 78 1500 x 1, 80 1500 x 0.5
http://www.fishplate.org/vehicles/
Corrosion Acres, Georgia #354
More information about the Triumphs
mailing list