[TR] tr3 trunk weather-strip

Andrew Uprichard auprichard at comcast.net
Mon Aug 10 18:03:10 MDT 2009


I found I had to tap down the groove which holds the weather strip.  In one
place I had to cut out a piece and re-weld, but this probably isn't a good
idea for new paint.

Andrew

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Frank Fisher
Sent: Monday, August 10, 2009 1:34 PM
To: triumphs at autox.team.net
Subject: [TR] tr3 trunk weather-strip

i know this has been covered before but my search of the go back machine has
not turned up any results.
probably operator error!
so i just fitted my nice
new glossy original trunk lid to my nice and glossy TR3. new weather-strip
of
course.
the weather-strip fitted real nice into my grove.
to get the trunk to
close i have to shim the budget lock.
having shimmed the lock and got it
closed the outer edges (lock stile only) are turned up and look terrible.
how
have you guys overcome this?
i did set all margins and shape to good with the
old weatherstrip in place during prep work in readiness for paint.
if you cut
your weather-strip, how did you cut it for a consistent shape? im not sure
me
hacking at it with a box cutter is the best approach.
thanks
Frank
P.S. boy
those replacement hinges are a piece of junk eh?
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive


More information about the Triumphs mailing list