[TR] Breather for TR3 Alloy Valve Cover

[Michael Moore]

David, that's just like the valve cover I got rid of because of the  
same problem.
Looks like a great and workmanlike solution. I bet it works just fine.

Mike Moore
On Apr 22, 2009, at 3:15 PM, DLylis at aol.com wrote:

> As I posted earlier I installed an alloy valve cover with the non  
> breather
> cap, and discussed the resulting oil coming from the lower breather   
> tube.
> I have solved the problem (maybe) by getting a 3/4" washer  that is  
> 2" in
> diameter and soldering a 1 1/2" OD chrome over brass tail  piece  
> from a sink.
> There is grinding and fitting to get it just right, and  I have yet to
> make the rubber gasket, but check out the pics.  Yes,  there is  
> enough bonnet
> clearance and now I have a breather cap.
>
> _http://i215.photobucket.com/albums/cc88/TRG69/P4220375.jpg_
> (http://i215.photobucket.com/albums/cc88/TRG69/P4220375.jpg)
> _http://i215.photobucket.com/albums/cc88/TRG69/P4220376.jpg_
> (http://i215.photobucket.com/albums/cc88/TRG69/P4220376.jpg)
>
> It is not yet in service as I am rebushing my rockers.  More to  come.
>
> David  Lylis
> 69 TR6 CC26160L
> 60 TR3A TS74461LO
> *************