[TR] Crane/Allison MOLEX Plug Needed

[J.C. Hassall]

At 11:06 AM 4/8/2009, Brian Thomas wrote:
>Hi,
>
>Does anyone have a "spare" white plastic Molex plug housing.  This is
>used to hold the 3 wires from the distributor pickup and is
>apparently the same for all Crane/Allison electronic distributor kits.
>
>I need one because the exchanged installation kit supplied by Crane
>last fall did not include one and of course CRANE is no longer in business.
>
>Hopefully someone with a failed unit will still have this part and be
>willing to part with it for a nominal fee.

Brian, Radio Shack carries these connectors.


>Thanks,
>
>Brian
>
>Brian Thomas            email:  ThomasB at QueensU.Ca
>92 Wyona Lane           work:   613-533-2228
>Holliday Point, R R 1   home:   613-385-1947
>Wolfe Island, Ontario   toys:   54 TR2, 56 TR3, 67 TR4A, 80 TR8,
>CANADA  K0H 2Y0                 52 Ferguson TEA20
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs at autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>You are subscribed as jhassall at blacksburg.net
>
>http://www.team.net/archive

--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go