[TR] Alternator Output vs RPMs

[Dave1massey at cs.com]

In a message dated 9/15/2008 3:03:39 PM Central Daylight Time, 
75TR6 at tr6.danielsonfamily.org writes: 
> I do have TBI on my car but there is no idle control valve used in the
> installation. Rick Patton did use one on the first car he converted but then
> decided it wasn't necessary. However my distributor has been converted to
> fully electronic with the ECM controlling it so that may make a difference
> along with the Master's wire harness.
> 
Mark Fisher, in Chicago, was using timing as an idle speed control.  Works 
pretty well.

Dave