[TR] how they balance allow wheels

[FRED E THOMAS]

Probably any motorcycle shop, especially a "Harley" dealer  !!!!  "FT"
=================================================================================
----- Original Message ----- 
From: "Geo Hahn" <ahwahnee18 at gmail.com>
To: "Bob Danielson" <75TR6 at tr6.danielsonfamily.org>
Cc: <Triumphs at autox.team.net>
Sent: Friday, September 05, 2008 10:25 PM
Subject: Re: [TR] how they balance allow wheels


> Do you mean Costco?
>
> I wonder if such a machine could balance a wire wheel mounted on a
> slined hub with knock-off?
>
> On 9/5/08, Bob Danielson <75TR6 at tr6.danielsonfamily.org> wrote:
>
>> ...has this "new" balancer that actually mounts via the lug nut
>> holes. These have been around for a while but each stud had to be 
>> manually
>> aligned with the wheel's stud hole. This machine does it automatically 
>> and
>> gets it centered perfectly.
>>
>> Same place that will fill your tires with nitrogen!
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as frede.thomas2 at verizon.net
>
> http://www.team.net/archive