[TR] TR3 oilite bush

[Geo Hahn]

I believe it is made of sintered bronze.

That bushing is sometimes called the Pilot Bush which also refers back
to Joe's message.

On 9/1/08, Joe Curry <spitlist at cox.net> wrote:
> I thought you were referring to the close relationship that "W" has with the
> oil industry!  :)
>
> Joe
>
> -----Original Message-----
> From: triumphs-bounces+spitlist=cox.net at autox.team.net
> [mailto:triumphs-bounces+spitlist=cox.net at autox.team.net] On Behalf Of
> FGFO1 at aol.com
> Sent: Monday, September 01, 2008 2:30 PM
> To: triumphs at autox.team.net
> Subject: [TR] TR3 oilite bush
>
> Any one know what material the oilite bush is made from?
> The oilite bush is the bronze colored bush that fits into the back of the
> crank. The input shaft of the gearbox fits inside it.
> While we are talking about it, I cant locate mine right now so does any one
> have an accurate length for that bush?
> Its either 1.000 to 1.160 or someplace in-between.
> thanks
> Frank Fisher
>
>
>
> **************It's only a deal if it's where you want to go. Find your
> travel
> deal here.
> (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as spitlist at cox.net
>
> http://www.team.net/archive
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as ahwahnee18 at gmail.com
>
> http://www.team.net/archive