[TR] TR3 oilite bush
Joe Curry
spitlist at cox.net
Mon Sep 1 15:42:20 MDT 2008
I thought you were referring to the close relationship that "W" has with the
oil industry! :)
Joe
-----Original Message-----
From: triumphs-bounces+spitlist=cox.net at autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net at autox.team.net] On Behalf Of
FGFO1 at aol.com
Sent: Monday, September 01, 2008 2:30 PM
To: triumphs at autox.team.net
Subject: [TR] TR3 oilite bush
Any one know what material the oilite bush is made from?
The oilite bush is the bronze colored bush that fits into the back of the
crank. The input shaft of the gearbox fits inside it.
While we are talking about it, I cant locate mine right now so does any one
have an accurate length for that bush?
Its either 1.000 to 1.160 or someplace in-between.
thanks
Frank Fisher
**************It's only a deal if it's where you want to go. Find your
travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as spitlist at cox.net
http://www.team.net/archive
More information about the Triumphs
mailing list