[TR] Brake master cylinder

[pethier at comcast.net]

 -------------- Original message ----------------------
From: <jimmuller at rcn.com>
> Randall answered:
> > > However, when you are installing an new master cylinder
> > > bench bleeding is the only way to get all the air out of it.
> 
> > Well, just to present the opposing viewpoint, I have never
> > bench bled, and it's never caused me any problems.
> 
> When I replaced all the brake lines in the Spitfire I sure didn't bench-bleed 
> them!  Fluif would have drippppped all over the place as I put the lines in.  
> Had no trouble bleeding them in situ.  Have had no brake trouble since then.
> ---
> Jim Muller


Sam ting.  I use a Gunson E Z Bleed and have never had any trouble.  Replaced all the lines in a Europa and it bled out fine.

--
Phil Ethier West Side Saint Paul Minnesota USA
62 Triumph TR4 CT2846L, 07 Saturn Ion 3 2.4, 93 Suburban, 94 Miata C-package, 79 Caterham 7
pethier [at] comcast [dot] net http://forum.mnautox.com/forums/ http://www.flickr.com/photos/pethier