[TR] Brake master cylinder

[jimmuller at rcn.com]

Randall answered:
> > However, when you are installing an new master cylinder
> > bench bleeding is the only way to get all the air out of it.

> Well, just to present the opposing viewpoint, I have never
> bench bled, and it's never caused me any problems.

When I replaced all the brake lines in the Spitfire I sure didn't bench-bleed them!  Fluif would have drippppped all over the place as I put the lines in.  Had no trouble bleeding them in situ.  Have had no brake trouble since then.
---
Jim Muller