[TR] TR6 Brake pedal height

[Tom Note]

If I were to adjust my accel. pedal thast much lower, I'd never come close 
to full throttle. My concern, tho, is not the go pedal, but the ht. of the 
brake pedal. It's much lower at rest than the clutch pedal. I've only seen 
one other TR6 like that, and I didn't get a chance to speak with the owner.
I take it,Bob, from the work you've done, that  the rod connecting the brake 
pedal to the booster is not adjustable in length. Too bad. I have no idea 
how it ended up this way. I'm determined to work out a way to extend it. Any 
ideas appreciated.
Thanks,
Tom

----- Original Message ----- 
From: "Bob Danielson" <75TR6 at tr6.danielsonfamily.org>
To: "'Tom Note'" <tom628 at verizon.net>; "'TR List'" <triumphs at autox.team.net>
Sent: Wednesday, October 22, 2008 8:50 AM
Subject: RE: [TR] TR6 Brake pedal height


> On my '75, the clutch & brake pedal are just about dead even. I replaced
> everything that attaches to those two pedals last winter and I can't think
> of any adjustment for them.
>
> The go pedal is a little higher but that was my preference when I
> re-installed it after putting in Art Lipp's bushing kit for the shaft. The
> bracket on the end of the accelerator shaft gives you the option of moving
> the pedal height up or down. You just want to make sure you still have 
> 100%
> throttle opening when pushed to the floor.