[TR] Valve adjusting nuts

[Bob Labuz]

On Sunday 11 May 2008 09:35 am, terryrs at comcast.net wrote:
> Am I missing something?  The valve adjusting nuts on the TR3A rocker arms
> seem a bit small for a half inch wrench, yet don't fit metric either. 
> Every time I adjust the valves, I bugger up the corners of the nuts a bit
> more.  I'd like to replace them with new from a local supplier if possible,
> just to save shipping.
>
> Terry Smith, '59 TR3A
> New Hampshire
Terry,

Try using a 6 point box wrench. 1/2 " is the correct size.

Bob