[TR] Miata Seat Bracket Kit in Design Phase

[N197TR4 at cs.com]

Hi "PaPa" Jim....apparently you have achieved a new status in life.

The TR2/3  conversion is unknown at this time, but you will go on the list 
for further information. Someone may be needed for trial installation.

Uncle Jack & Joe


> Hi Joe,
> I have a set of Miata seats to put into my 3a, and would be thrilled to have 
> a pre-fabbed way of doing it.
> Please put me on your list, if you have one,
> Thanks,
> Jim Wallace
>  
> PS In doing a trial placement, they will need to be something like 1 1/2" up 
> from the floow, in order to gain enough width at the transmission tunnel. 
> For sure the attached-to-the-seat female end for the seatbelts had to go for 
> teh same reason. 
>  
> 

   </HTML>