[TR] seal-spare tire well lid tr3

[Ibsen Dow]

I just did my TR3 spare tire compartment seal, and I had to re-adjust the lock
taps in spare tire compartment to allow the locking mechanism to work. You
will have to bend them slightly outwards (towards the rear) to make them lock
properly because of the new seal.
Ibsen
  ----- Original Message -----
  From: L1J1S at aol.com
  To: triumphs at autox.team.net
  Sent: Sunday, March 16, 2008 2:44 PM
  Subject: [TR] seal-spare tire well lid tr3


  hello, i need to put on the rubber seal for the spare tire lid on my tr3-a.
  the rubber has a square section that goes inside on the body of the car.
there
  is a lip on the rubber, the question is which side on the body does the lip
  face, the outer part of the frame or the inner part of the frame. i tried it
on
  the outside part of the frame and i could not lock up the spare tire cover.
  larry schwartz 1960 tr3-a



  **************It's Tax Time! Get tips, forms, and advice on AOL Money &
  Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)
  _______________________________________________

  Support Team.Net  http://www.team.net/donate.html

  This list supported in part by the Vintage Triumph Register
  http://www.vtr.org


  Triumphs at autox.team.net
  http://autox.team.net/mailman/listinfo/triumphs

  You are subscribed as flashtr3 at cox.net

  http://www.team.net/archive