[TR] TR4 - TR6 Transmission

[Kinderlehrer]

Bob, when I put the TR4 OD in my TR3A, I removed the cross member, drilled 2 
new holes next to the existing holes, (in front or behind, can't remember) 
and then used a cutoff wheel on my Dremel to join the new and old holes to 
make them slots. Worked for me.
Bob

----- Original Message ----- 
From: "Bob Labuz" <yellowtr at adelphia.net>
To: "Triumph Email List" <triumphs at autox.team.net>
Sent: Saturday, March 15, 2008 7:42 AM
Subject: [TR] TR4 - TR6 Transmission


> Hello,
>
> I have what I believe is a TR6 Transmission that I would like to use in my 
> 3A
> but I note that the rear mount position is about 1/2 to 3/8 " longer than 
> the
> 3.
>
> I have heard this discussion before that a plate can be made to adjust for 
> the
>> distance.
>
> Has or is there anyone out there who can either provide the details, 
> sketch or
> photo of how it was done? Or better is there a supplier of the needed 
> plate?
>
> Seems to me that the plate where the transmission mount would be the part 
> to
> be adjusted.
>
> Bob
> _______________________________________________