[TR] Hydraulic Jack Question

[tom white]

Probably means the seals in the jack are leaking.  You should be able to buy a
rebuild kit at your lfps.  I did that many years ago for the 30" bottle jack
on my engine lift.

Best regards,
Tom

> From: 75TR6 at tr6.danielsonfamily.org
> To: triumphs at autox.team.net; 6pack at autox.team.net
> Date: Fri, 7 Mar 2008 09:08:32 -0500
> Subject: [TR] Hydraulic Jack Question
>
> What causes a jack or even an engine crane to stop holding a position and
> settle back down after a while? Is it low fluid or a bad gasket or a
> combination of things? I know that there's an industry standard for how
much
> one can drop over an x period of time. But I'm talking about a matter of
> minutes with or without a load on it?
>
> Bob Danielson
> 1975 TR6 CF38503U
> Running w/ Throttle Body Injection
> http://tr6.danielsonfamily.org
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tswhitez123 at hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Shed those extra pounds with MSN and The Biggest Loser!
http://biggestloser.msn.com/