[TR] Rear Wheel Axles and Front Grease Caps
pethier at comcast.net
pethier at comcast.net
Thu Mar 6 07:10:46 MST 2008
From: "Rick & Cecilia" <rickandcecilia at comcast.net>
> I have found that if you drill a small hole right in the center of the cap
> and then take a metal screw and put it through the hole, it will go in and
> hit the center of the stub axle and force the cap off. Sort of like a gear
> puller. Works every time and you can leave the small hole in the cap for
> next time. Just make sure that the hole is smaller than the screw so it
> has something to bite against.
Or use a bodyman's slide hammer. They are cheap and available at your local auto-parts store.
I always put a little piece of tape over the hole to keep dust out of the area.
--
Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban,
1994 Miata C package
pethier [at] comcast [dot] net http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
I decry the textmessagization of the American-English language.
More information about the Triumphs
mailing list