[TR] Plump vs. lifeless wishbone seals

[Randall]

> However, following the diagram in Moss's catalog,  I also 
> used the black rubber seals for the INNER end of the lower 
> wishbones.  But their is NO grease fittings for these 
> locations.  Thus those seals are loose and rather lifeless.
> Is this the way its suppose to be?

Should not be "loose"; but they do not get grease to make the seal bulge.
The seals only serve to keep dirt and water out of the (self-lubricating)
nylon sleeves.

Randall