[TR] Triumphs Digest, Trailer Hitches for Triumphs

[A Daniel Cronin]

So Joe, was there much interest from the TR2 to 3B crowd in the Miata
conversion kit?
Dan

 Planning & Development Services
A. Daniel Cronin
248
761-2673



----- Original Message ----
From: "N197TR4 at cs.com"
<N197TR4 at cs.com>
To: triumphs at autox.team.net
Sent: Saturday, June 14, 2008
2:33:17 PM
Subject: [TR] Triumphs Digest, Trailer Hitches for Triumphs

Cool, 
I had a trailer hitch on both my TR4A and my current TR3A.  The TR4A towed an
Appleby Pop-up camper.  I also pulled a utility trailer with both of these
cars, when I wasnt pulling stumps.

Hitch was made from sturdy flat mill stock
using the frame rails and cross 
tubes.  I sold it to Brad Kahler.

I was
unaware, or do not remember a factory hitch. If there were enough
interest....

BTW, the Miata seat conversion kit is making progress and will
likely be 
available in July. Certainly by VTR Convention.  This is Uncle
Jack's Project with 
engineering, and manufacturing by my son, Sean.

Joe A
------------------------------------------------------------------------------
-----------------------------------------
> 
> OK Guys here's one for you?
Anyone have a line on where I can get a
> trailer hitch set up for a TR-6. I
just bough a 1955 Glastron 13 ft.
> runabout in unbelievably good shape for
near nothin. Really a retro cute
> little thing with a 20 horse Evinrude. I
think this blue and white honey
> would look real nice towed behind my Red TR.
> 
> Did this before with a 16 ft many an eon ago with a TR-4a when they were
> still being made. A factory hitch was available at the time. NOW?? Wtfk.
>
> Deano
> 
> 

  </HTML>
This list supported in part
by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as
adcronin at ameritech.net

http://www.team.net/archive