[TR] TR3A interior question.

[tr3bob at cox.net]

Tom,

In my experience I've found that the floor mats for the TR3 are made a little
wider so that they lay up the vertical slightly to cover the seat well under
the doors.  I used the floor carpet snap rings to keep them in position.

FWIW

Bob Stahlbush

60 TR3
66MGB
76 Midget
83 XJ6
70 BSA T-bolt
70 BSA lightning



---- tom white <tswhitez123 at hotmail.com> wrote:
> I bought an interior kit from TRF many, many years ago.  I had it installed
by
> someone else also years ago.  When I installed my carpets last Sept. I
noticed
> that on the vertical pieces between the wheel arches and the door post
there
> is about an inch and a half of exposed body structure at the bottom.  Were
> these installed wrong?  Did I get the wrong kit?
>
> Thanks.
>
> Best regards,
> Tom
>
>
>
> _________________________________________________________________
> Instantly invite friends from Facebook and other social networks to join
you
> on Windows Live Messenger.
> https://www.invite2messenger.net/im/?source=TXT_EML_WLH_InviteFriends
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tr3bob at cox.net
>
> http://www.team.net/archive