[TR] u-joint installation
Dave1massey at cs.com
Dave1massey at cs.com
Fri Jul 25 06:28:48 MDT 2008
In a message dated 7/24/2008 10:27:50 PM Central Daylight Time,
peterara at msn.com writes:
> I know this has been covered, but I can't find my notes. So could you
> folks
> refresh me on installing u-joints into the half shafts of my TR6. I know it
> involves sockets and vices (not the alcohol drinking vices), but any
> tips/methods would be very appreciated.
>
Peter, I've done this with hammers, sockets and a vice, and with sockets and
an hydraulic press. The easiest method I've found, however, is take it to a
shop and let the pro's do it.
Dave
More information about the Triumphs
mailing list